EIGRP with five routers lab work

EIGRP Configuration

Today in this tutorial we learn how to configure a EIGRP on a cisco router.If you are a CCNA student then i hope you very well know how to configure it and you have configured EIGRP in cisco packet tracer so many times.But here in this article i will show you how to configure EIGRP on cisco routers for a complex network.

Configuration on Router R1:

Configuration in Router R2:

Configuration in Router R3:

Configuration in Router R4:

Configuration in Router R5:

Configuring EIGRP on Router R1, R2. R3, R4, and R5

We will turn on the EIGRP and assign autonomous system.

Here in this lab we have taken 1 as Autonomous System (AS) number. It can be from 1 to 65535..

Note: All routers in the same network must use the same AS number.

Router R1

Router R2

Router R3

Router R4

Router R5

EIGRP Troubleshooting Command

After configuring EIGRP if you face any problem in communicating your devices you can use below troubleshooting command to find out any error or fault in your network and then fix them.

Therefore, we have completed the EIGRP configuration lab with the help of cisco packet tracer version 7.0.