Wireless Network Communication with router

How to configure Wireless Network Communication

Hi ! everyone on today we are going to learn about how to configure Wireless Network communication on a router. Now we have to do these tasks given below to configure this wireless network.

Let us create wireless topology on packet tracer. For this go to the wireless devices and select Linksys wireless router, take some PCs and provide them with wireless Linksys module so that they can communicate through router wireless. For that go to the PC physical mode as shown in our second screenshots or figures below.

 

 

Go to PC, and remove wired LAN and install wireless LAN module.

Now we can see the two connected PCs with the Linksys-Wireless Router0

Set the IP address for the Linksys-Wireless Router0.

As we can see that this wireless router provides us with the DHCP service, so we can obtain IP automatically by using this service for our PCs.

So now we know that our PCs can communicate with each other.

Now, let us apply authentication to our wireless router. For that, we should go to Config tab, click on Wireless. Provide it with the information as described below. 

Now we should go to PC desktop mode, Click on PC wireless.

Click on connect. Select the device, you want to connect to, click connect.

 

We should give the correct password that we have previously mentioned in wireless settings

Same procedure we have to do for PC1 to connect with Linksys-Wireless Router.

Finally we have completed the configuration in wireless communication with router in the packet tracer version 7.0.